Its been a long gap, since i've written presented you with some technical stuff,
Hope everyone is safe and fine.... Belated Ugadi wishes to all of our readers.
Being busy with job & other activities, not able to contribute much here and feeling bad about it.
Today, i'm going to write a simple post on estimating the seat orifice diameter required for purging a gas into a system for a specific purpose at a given rate.
This calculation can be used for estimating the nozzle / orifice size required to purge gasses like H2, N2, HCl, NH3 etc.
Here, in the subject case i've considered a requirement of purging dry HCl gas into reactor containing reactants and the reaction is a semi-batch, where there is no thermal accumulation.
As a part of preliminary assessment, i've generated a pressure RC1 study to evaluate the heat of reaction and after extrapolating it to the commercial batch size, below are identified:
1. As per the energy balance which is performed using the available utility, the addition time is 4 hours
2. In - line to the addition time of 4 hours, the mass flowrate is derived as 200 Kg/hr.
(Uniform flow of gas is recommended, hence the mass flowrate is derived as total quantity / time)
Now the problem statement is defined and the solution to be identified i.e., estimation of orifice regulator sizing.
Step - 1: Estimate the HCl volumetric flowrate & Corresponding air flowrate
Density of HCl gas = Mol. Wt. of HCl / 22.414 = 36.46 / 22.414 = 1.626 Kg/m3
(Considering HCl as ideal gas; At STP 1 mole of gas occupies 22.414 L of volume).
Volumetric flowrate = Mass flowrate/density = 200 (Kg/hr) / 1.626 (Kg/m3) = 123 m3/hr.
Corresponding Air flowrate = HCl flowrate x (HCl SG)^0.5
( HCl SG = HCl density / Air density; Air density = Air mol. wt. / 22.414 = 28.84/22.414 = 1.29)
= 123 x (1.626/1.29)^0.5 = 138 m3/hr.
Step - 2: Estimation of Air-flow in NM3/hr
For estimating the air flowrate in NM3/hr we need the cylinder pressure and temperature;
Cylinder pressure is 80 bar.g and temperature is 70 C,
Air flowrate = Air flowrate x (273.15 x Cylinder pressure) / ((Temperature+273.15)*1.001325)
= 123 x 273.15 x 80 / ((70 + 273.15) x 1.001325) = 8805 NM3/hr.
Step - 3: Estimation of orifice sizing
Seat orifice area = Air flowrate (in NM3/hr) / (0.33 x inlet pressure (a)).
= 8805 / (0.33 x (80 + 1)) = 329 mm2 = 0.5 inch2.
Orifice diameter = (4 x 0.5 / 3.141)^0.5 = 0.81 inch.
QuizMaker
Related Articles:
Bond Energy calculations
Calculate Product Assay in liquid ?
Calculate NPSH - Net Positive Suction Head
How to Calculate height required for vapour column of batch reactor ?
About The Author
Hi! I am Ajay Kumar Kalva, Currently serving as the CEO of this site, a tech geek by passion, and a chemical process engineer by profession, i'm interested in writing articles regarding technology, hacking and pharma technology.
Follow Me on Twitter AjaySpectator & Computer Innovations
Follow Me on Twitter AjaySpectator & Computer Innovations