Pharma Engineering

For Engineer By Engineer

    • Tuesday, 12 June 2018

    Home solvent properties Chemical Solvent Properties

    Chemical Solvent Properties

    21:43:00


    Hiii All....!!! Been a long time,

    This post is in response to one of the comment i received from Mr. Pradeep Pundipalli,



    What i got, i've posted here, if i've missed something, sorry for that,

     Hope majority of the solvents were covered above.....!!!!

     Comments are most Appreciated.....!!!!
    About The Author

    Hi! I am Ajay Kumar Kalva, Currently serving as the CEO of this site, a tech geek by passion, and a chemical process engineer by profession, i'm interested in writing articles regarding technology, hacking and pharma technology.
    Follow Me on Twitter AjaySpectator & Computer Innovations
    Read more
    Posted by at
    Labels:
    Location: Srikakulam, Andhra Pradesh, India

    7 comments:

    1. Mahesh vante13 June 2018 at 21:10

      Dear Ajay,
      If possible please post something about solvent recovery plant in pharma industry....

      ReplyDelete
    2. Anonymous4 July 2018 at 13:36

      Dear ajay sir,
      Can you please explain me the advantages of graphite condenser over SS condenser. And also tell me how much value of U we should take to calculate the area required for an heat duty.

      ReplyDelete
      Replies
      1. Ajay Kumar4 July 2018 at 18:23

        Dear ,

        Graphite condensers shall be used for condensing acidic vapours, as an alternate for graphite condensers, haste alloy / tantalum condensers shall be used.
        Where as SS shall be used only for handling vapours having pH above 5.0.

        Tantalum will have higher overall heat transfer co-efficient than graphite,
        The U value of the graphite can be considered as 30% less than that of tantalum.

        Any queries pl revert.

        Regards,
        AJAY K

        Delete
    3. seetharmaiah20 July 2018 at 21:12

      How static electricity will discharge from reactor like MSGL ,Teflon reactor while charging the solvent into the reactor

      what is the uses of tantanium plugs where have to insert

      ReplyDelete
      Replies
      1. Ajay Kumar6 September 2018 at 08:27

        Hii sir,

        Pl find the below link, it is shown below with well designed images,
        https://www.ddpsinc.com/blog-0/repair-materials-and-techniques-for-restoring-glass-lined-steel?success=true

        Best Regards,
        AJAY K

        Delete
    4. NARAYANA22 July 2018 at 16:29

      Dear sir
      Can you please explain me how to calculate the steam consumption in triple effect falling film cum forced circulation evaporator?

      ReplyDelete
      Replies
      1. Ajay Kumar21 August 2018 at 12:10

        Dear Narayana,

        What is the solvent you are using, and what is the amount of boilup you need to get, what is the heat transfer area of the triple effect evaporator?

        Kindly share the details,

        Regards,
        AJAY K

        Delete

    This Blog is protected by DMCA.com

    DMCA.com for Blogger blogs

    ABOUT ADMIN


    Hi! I am Ajay Kumar Kalva, owner of this site, a tech geek by passion, and a chemical process engineer by profession, i'm interested in writing articles regarding technology, hacking and pharma technology.

    Like Us On Facebook